EPX
Epoxy Resin
Two-part epoxy systems for casting, laminating, bonding and protective coating applications.
Resin Materials & Supply
Quality Resin.
Reliable Performance.
Discover dependable resin solutions for your requirements, backed by a commitment to quality, consistency, and customer support.
- Supply
- Trade & bulk quantities
- Documentation
- TDS & SDS available
- Ordering
- Quote-based, no minimum guesswork
EPX-200
- Product
- Epoxy Resin
- Pack Sizes
- 1 – 200 kg
- Datasheets
- TDS / SDS
Range
Epoxy, casting, coating, polyester & UV resin
Packaging
Multiple pack sizes from sample to bulk
Support
Technical guidance on product selection
Ordering
Quotation-based, for single units or bulk
01 — Product Catalogue
Resin materials
we supply
A structured range covering casting, coating, laminating and industrial applications. Full technical documentation is available for each product line.
CST
Casting Resin
Low-viscosity systems formulated for deep-pour casting, moulding and encapsulation work.
CTN
Coating Resin
Surface coating systems for protective layers, seal coats and finished surface build-up.
IND
Industrial Resin
Higher-volume systems supplied for manufacturing, composites and industrial process use.
PLY
Polyester Resin
General-purpose and specialised polyester systems for laminating, filling and casting work.
UVR
UV Resin
Single-component UV-curing resins for rapid, controlled curing in small-format and precision work.
02 — Featured Products
Selected product lines
A sample of the materials we supply. Open any product for applications, packaging options and the technical datasheets available for that line.
Epoxy
EPX-200
SKU · EPX-200
Two-Part Epoxy Resin System
A general-purpose two-part epoxy system used across casting, laminating and coating work where a consistent, repeatable result is required.
- Components
- Two-part (A + B)
- Pack sizes
- 1 kg – 200 kg
- Pricing
- Quote-based
- Docs
- TDS / SDS
SKU · EPX-200 — Two-Part Epoxy Resin System
Two-Part Epoxy Resin System
A general-purpose two-part epoxy system supplied for casting, laminating and coating applications. Available in multiple pack sizes for workshop and production use.
Intended Applications
- Casting
- Laminating
- Surface coating
- Bonding
Available Packaging
1 kg5 kg10 kg
25 kg200 kg
Technical Properties
| Mix ratio | Refer to product TDS |
|---|---|
| Viscosity | Refer to product TDS |
| Pot life | Refer to product TDS |
| Cure schedule | Refer to product TDS |
| Colour | Refer to product TDS |
Handling & Storage
Refer to the product Safety Data Sheet for handling, personal protective equipment and storage requirements. Store in original, sealed containers in a dry, well-ventilated area away from direct sunlight and ignition sources.
Technical values vary by grade and batch. Always confirm against the current manufacturer TDS/SDS before specifying or using this product.
Casting
CST-450
SKU · CST-450
Low-Viscosity Casting Resin
A low-viscosity casting system developed for deep-pour and moulding applications where flow and bubble release matter.
- Components
- Two-part (A + B)
- Pack sizes
- 1 kg – 50 kg
- Pricing
- Quote-based
- Docs
- TDS / SDS
SKU · CST-450 — Low-Viscosity Casting Resin
Low-Viscosity Casting Resin
Formulated for casting and moulding work where low viscosity and clean flow are required. Suitable for deep-pour and encapsulation applications.
Intended Applications
- Deep-pour casting
- Mould making
- Encapsulation
- Model replication
Available Packaging
1 kg5 kg10 kg50 kg
Technical Properties
| Mix ratio | Refer to product TDS |
|---|---|
| Viscosity | Refer to product TDS |
| Pot life | Refer to product TDS |
| Demould time | Refer to product TDS |
| Colour | Refer to product TDS |
Handling & Storage
Refer to the product Safety Data Sheet. Use appropriate personal protective equipment. Store sealed, in a dry, ventilated area, away from heat and direct sunlight.
Technical values vary by grade and batch. Always confirm against the current manufacturer TDS/SDS before specifying or using this product.
Coating
CTN-110
SKU · CTN-110
Protective Coating Resin
A surface coating system for protective layers and seal coats, supplied for workshop and industrial finishing use.
- Components
- Two-part (A + B)
- Pack sizes
- 1 kg – 100 kg
- Pricing
- Quote-based
- Docs
- TDS / SDS
SKU · CTN-110 — Protective Coating Resin
Protective Coating Resin
A coating system supplied for protective surface layers, seal coats and finished surface build-up across workshop and industrial use.
Intended Applications
- Protective coatings
- Seal coats
- Surface finishing
- Substrate protection
Available Packaging
1 kg5 kg20 kg
25 kg100 kg
Technical Properties
| Mix ratio | Refer to product TDS |
|---|---|
| Coverage | Refer to product TDS |
| Pot life | Refer to product TDS |
| Overcoat window | Refer to product TDS |
| Finish | Refer to product TDS |
Handling & Storage
Consult the Safety Data Sheet for handling and storage. Keep containers closed when not in use and store away from heat and direct sunlight.
Technical values vary by grade and batch. Always confirm against the current manufacturer TDS/SDS before specifying or using this product.
UV
UVR-020
SKU · UVR-020
UV-Curing Resin
A single-component UV-curing resin for rapid, controlled curing in small-format and precision applications.
- Components
- Single part
- Pack sizes
- 100 g – 5 kg
- Pricing
- Quote-based
- Docs
- TDS / SDS
SKU · UVR-020 — UV-Curing Resin
UV-Curing Resin
A single-component resin that cures under UV light, used where fast, controllable curing is required in small-format or precision work.
Intended Applications
- Small-format casting
- Precision bonding
- Rapid prototyping
- Repair work
Available Packaging
100 g250 g500 g
1 kg5 kg
Technical Properties
| Viscosity | Refer to product TDS |
|---|---|
| UV wavelength | Refer to product TDS |
| Cure time | Refer to product TDS |
| Shore hardness | Refer to product TDS |
| Colour | Refer to product TDS |
Handling & Storage
Keep away from UV and daylight sources during storage. Refer to the Safety Data Sheet for full handling and storage requirements.
Technical values vary by grade and batch. Always confirm against the current manufacturer TDS/SDS before specifying or using this product.
03 — Applications
Industries &
applications served
Our resin range supports a wide set of industrial, construction and manufacturing processes. Listed below are the areas we most commonly supply.
Industrial Manufacturing
Resin systems supplied for production lines, tooling and component manufacture.
Protective Coatings
Coating and seal-coat systems for surface protection and finishing.
Construction
Resin materials used in flooring, bonding, repair and structural applications.
Electrical Applications
Encapsulation and potting resins supplied for electrical and electronic use.
Composite Manufacturing
Laminating and composite resin systems for reinforced material production.
Casting & Moulding
Casting systems for mould making, replication and encapsulation work.
04 — Why Choose Us
Built on consistency
and support
We focus on what matters to buyers of resin materials: reliable supply, clear documentation and a direct line to technical support.
Consistent Product Quality
Materials sourced and supplied to a consistent specification, so your results stay repeatable.
Reliable Supply
Planned stock and clear lead times, so you can schedule production with confidence.
Multiple Packaging Options
From small trial quantities through to bulk containers, sized to match your usage.
Technical Documentation
Technical and safety data sheets available for the products we supply.
Responsive Support
Direct access to product guidance when you need help selecting the right system.
Bulk Order Enquiries
Volume requirements handled through a straightforward quotation process.
05 — Bulk Orders
Looking for
resin in bulk?
Tell us what material you need, your required quantity, and your delivery location. Our team will help you with product availability and a quotation.
- Specify product, grade and pack size
- Confirm quantity and delivery location
- Receive availability and pricing by return
Request a Quote
Fields marked * are required.
Quote request received.
Our team will review your requirements and come back with availability and pricing.
06 — Technical Resources
Documentation
& downloads
Technical and safety documentation for the products we supply. Request a datasheet for any product line and we will send the current version.
Frequently asked technical questions
Casting resins are generally formulated for pouring into moulds or forms, while coating resins are formulated for application as a surface layer. The right choice depends on section thickness, required finish and application method. Share your application and we will point you to the appropriate product line.
Pack sizes vary by product line. Most lines are available from small trial quantities through to bulk containers. Exact options are listed on each product page and confirmed at quotation stage.
Yes. Technical Data Sheets and Safety Data Sheets are available for the products we supply. Request the document for your product of interest and we will send the current version.
Yes. Bulk and repeat-order requirements are handled through the quotation process. Submit your material, quantity and delivery location through the quote form and our team will respond with availability and pricing.
07 — About Us
Your partner
in resin supply.
Northline Resin supplies resin materials to workshops, manufacturers and trade customers. Our focus is straightforward: stock the materials our customers need, supply them to a consistent specification, and support them with the documentation and guidance required to use them properly.
We work on a quotation basis rather than a fixed online checkout, because resin requirements vary widely by application, grade and volume. Tell us what you are working on and we will help you identify the right product, pack size and delivery arrangement.
Company registration, facility and certification details available on request.
- Focus
- Resin materials only
- Customers
- Trade, workshop & industrial
- Ordering
- Quotation based
08 — Contact
Talk to our
materials team.
For product questions, availability, pricing or documentation requests, get in touch directly.
- Email sales@northlineresin.com
- Phone +91 00000 00000
- WhatsApp Message us
- Address Business address on request
- Hours Mon – Sat · 9:00 – 18:00
Business location
available on request
Send a Message
For general and product enquiries. Fields marked * are required.
Message sent.
Thank you — our team will get back to you shortly.